- AC/DC Adapters[1]
- Instrument Parts & Accessories[2]
- Other Power Supplies[7]
- Other Electronic Measuring Instruments[10]
- Oscilloscopes[10]
- Signal Generators[10]
- Spectrum Analyzers[7]
- Testing Equipment[5]
- Voltage Meters[3]
- Counters[1]
- Other Welding & Soldering Supplies[2]
- Other Welding Equipment[1]
- Electric Soldering Irons[1]
- Other Measuring & Gauging Tools[1]
- Other Measuring & Analysing Instruments[1]
- Contact Person : Mr. Wang Vincent
- Company Name : MCH Instruments Co., Ltd.
- Tel : 86-755-83281201
- Fax : 86-755-83280257
- Address : Guangdong,Shenzhen,Room 28P, Block B, Modern Window, Huangqiang Road North, Shenzhen, GD, CN
- Country/Region : China
- Zip : 518031
MCH DDS Function Generator,SM-4040 dds function generator,40MHz frequency w/AM FM
MCH DDS Function Generator, SM-4040 DDS Function Generator, 40MHz Freq., built-in frequency counter.
Specifications:
Waveforms | |
Main Waveforms | sine, square(only sine is available above 40MHz) |
Waveform length | 8~16000point |
Amplitude resolution | 12bit |
sampling rate | 200MSa/S(≤80MHz) 300MSa/S(120MHz) |
Built-in Arbitary | Triangle,±Ramp, ±pulse,rise/fall exponential,rise/fall logarithm,gause noise,cardiac,SIN(X)/X,DC |
Waveform length | 8~160000point |
Amplitude resolution | 10bit |
sampling rate | 10MSa/S(≤80MHz) 20MSa/S(120MHz) |
Arbitary Waveform | |
Waveform length | 8~16000point |
Amplitude resolution | 10bit |
sampling rate | 10MSa/S(≤80MHz) 20MSa/S(120MHz) |
Memory | 6*4K |
Waveform characteristics | |
sine harmonic distortion | -35dBc |
sine distortion | ≤0.1%(20Hz-100KHz) |
square rise/fall time | ≤10na |
frequency characteristics | |
frequency range | 1.Main waveform:100uHz-10/20/40/80/120MHz |
2.Built-in arbitary:10mHz-100KHz | |
3.Arbitary waveform:10mHz-100KHz | |
Resolution | 1.μHz |
freq. accuracy | ≤±5PPm |
temperature coefficient | ≤2PPm/°C |
output characteristics | |
amplitude | Sine: (F≤40MHz) 1mVpp-10Vpp(50Ω);2Mvpp-20Vpp(open) |
(F>40MHz) 1Mvpp-6Vpp(50Ω) | |
Square: (F≤20MHz) 1mVpp-10Vpp(50Ω);2Mvpp-20Vpp(open) | |
(F>20MHz) 1Mvpp-6Vpp(50Ω); 2Mvpp-2Vpp(open) | |
Accuracy | ±1%+0.2mv(sine 1KHz) |
flatness | Amplitude≤1Vpp(50Ω load):≤±0.5dB |
Amplitude>1Vpp(50Ω load):≤±0.5dB(20MHz);≤±1dB(40MHz or above) | |
Resolution | 4digit display:0.1mV(output and offset) |
DC offset | (F≤40MHz) ιVpp/2+DCι≤5(50Ω); ιVpp/2+DCι≤10(open) |
Accuracy:±10%+2mV (note: No offset at freq. over 40MHz) | |
Unit | Vpp, mVpp, dBm, Vrms, mVrms |
pulse duty rate | 0.1% -99.9%(F≤10KHz);1%-99%(10KHz<F<100KHz) |
modulation | |
amplitude modulation | |
carrier waveform | sine, square |
Carrier Freq. Range | 100μHz-10/20/40/80/120MHz |
Modulation Waveform | sine, square, triangle,±Ramp, ±Pulse,Rise/fall exponential,Rise/fall logarithm,Gause noise, Cardiac, SIN(X)X,DC. |
Modulation Freq. Range | 100μHz-20KHz |
Modulation Depth | 1%-120% |
Modulation Distortion | ≤2% |
Source | INT/EXT(Ext. AM:±5V=100%) |
Frequency Modulation | |
Carrier Waveform | Sine, Square |
Carrier Freq. Range | 100μHz-20/40/80/120MHz |
Modulation Waveform | Sine, square, triangle, ±Ramp, ±Pulse, Rise/fall exponential,Rise/fall logarithm,Gause noise,Cardiac,SIN(X)X,DC |
Modulation Freq. Range | 100μHz-10kHz |
Max. Deviation | 50% of carrier freq. |
Frequency-shift keying | |
waveform | sine, square |
frequency range | 100μHz-10/20/40/80/120MHz |
Alternate time | 0.1ms-100S ±1% (10mHz-10kHz) |
Control mode | INT/EXT (External TTL level,F1:low-level,F2:high-level) |
Phase-shift keying | |
Waveform | sine, square |
Frequency range | 100μHz-20/40/80/120MHz |
Phase range(P1,P2) | 0~3600, Resolution:0.1o |
Alternate Time | 0.1ms-100s ±1% |
Control mode | INT/EXT(External TTL level,P1:low-level,P2:high-level) |
Burst | |
Waveform | sine,square,triangle,±Ramp,±Pulse,Rise/fall exponentional,Rise/fall logarithm,Cardiac,SIN(X)X. |
Frequency Range | 10mHz~100KHz |
Counting | 1-10000circles |
Start Phase | 0-360o,Resolution: 0.1o |
Alternate Rate | 0.1ms-100S ±1% |
Trigger Source | INT, EXT, Single |
Sweep | |
Waveform | Sine,Square |
Frequency Range | 100μHz-20/40/80/120MHz |
Amplitude range | (F≤40MHz) 1mVpp-10Vpp(50Ω);2mVpp-20Vpp(open) (F>40MHz) 1mVpp-1Vpp(50Ω); 2mVpp-2Vpp(open) |
Sweep Mode | Linear, Logarithmic, Rise, Fall, Signal |
Sweep Time | 0.1ms-100s ±1% |
Trigger source | INT, Signal |
Storage Characteristic | |
Parameters | Freq., Amplitude, Waveform, DC Offset and Function Status |
Capacity | 8 grounp of set-ups |
Recall Mode | Entire group of parameters is recalled with repective number |
Storage time | Over 10years |
*Specifications are subject to change without prior notice.
MCH DDS Function Generator,SM-4040 dds function generator,40MHz frequency w/AM FM